Stormseal heat-shrink film covering the full roof of a two-storey house, aerial view
Image supplied by Stormseal

Licensed Stormseal Installer for Storm and Make-Safe Work

Elevate Roof & Building Solutions is a licensed Stormseal installer in Perth. Stormseal is a polyethylene film that is heat-shrunk over a damaged roof or wall, sealing the building against wind, rain and hail until permanent repairs are carried out. It is used on make-safes where a tarp is unlikely to hold, or where repairs will take weeks or months.

Who is this for?

Stormseal make-safes are arranged by:

  • Insurance builders: make-safes that hold through the claim and repair timeframe without repeat call-outs.
  • Strata managers: protecting common property and lots after storm damage while quotes and approvals are arranged.
  • Insurers and adjusters: a documented make-safe that limits further loss.
  • Property owners: sudden roof damage from storms, hail, fallen trees or fire.
Stormseal heat-shrink film sealing the roofs of a multi-unit building, aerial view
Image supplied by Stormseal

Stormseal compared with a tarp

  • Holds in wind: the film is shrunk tight to the roof and fixed at the perimeter, so there is no loose material to flap, lift or tear. Stormseal states the product has been tested in 200 km/h winds.
  • No pooling or sagging: the tight surface sheds water rather than holding it.
  • Lasts until repairs: Stormseal states the film is UV treated and rated to last 12 months, so a property can stay protected through insurance and repair lead times.
  • Fewer return visits: tarps often need re-securing after each storm. A sealed Stormseal cover is installed once.
  • Less time on a damaged roof: the film is fixed at the perimeter of the damaged area, which reduces time spent working on unstable roof sections.
  • Fire retardant: the manufacturer states the film is fire retardant.
A roof sealed with Stormseal compared with a loose blue tarp lifting in the wind
Image supplied by Stormseal

02. Sealed to the Structure

Film fitted over the damaged area, fixed at the perimeter and heat-shrunk tight.

03. Photographed and Recorded

Before and after photos and a written record for the insurer, builder or strata manager.

Make-safe reporting
Photos and a written record supplied with every make-safe.

How a Stormseal make-safe is installed

  1. Inspect: the damage is inspected and photographed, and the structure under the damaged area is checked to confirm it is safe to cover.
  2. Prepare: loose or broken material is removed or secured, and sharp edges are covered so they cannot puncture the film.
  3. Fit: the film is cut to size, laid over the damaged area and fixed around its perimeter.
  4. Heat-shrink: the film is heated so it shrinks tight to the roof and seals around the damaged section.
  5. Record: the completed installation is photographed and documented for the insurer, builder or strata manager.

Stormseal was developed in Australia and is installed by trained, licensed installers. Stormseal reports it has protected over 4,000 Australian homes after storm damage. Elevate holds Stormseal installer status and appears on the Stormseal installer locator.

When Stormseal is used

  • Storm and hail damage to tiled and metal roofs
  • Tree impact and fallen branches
  • Fire-damaged roofs awaiting rebuild
  • Ceiling openings after a collapse, where the space needs sealing until repairs
  • Properties where repairs will take weeks or months because of insurance, materials or trade availability

Not every make-safe needs Stormseal. Small, short-term repairs may be better handled with a tarp or other temporary cover. We recommend the method that suits the damage and the expected repair timeframe. See our emergency make-safe and storm damage response services.

For a Stormseal make-safe, call 08 6558 1861.

Stormseal FAQs

Stormseal is a polyethylene film that is heat-shrunk over a damaged roof or wall to seal it against wind, rain and hail until permanent repairs are made. It was developed in Australia and is installed by trained, licensed installers.

Stormseal states the film is UV treated and rated to last 12 months. In practice it is intended to stay in place until the permanent repair is carried out, which removes the need to keep re-securing a tarp.

For larger damage or longer repair timeframes, a heat-shrunk cover is tight to the roof and sealed at the perimeter, so there is no loose material for wind to catch. For small, short-term repairs a tarp may be all that is needed, and we will say so.

Make-safe costs on a claim are approved by the insurer or their builder under the policy. We provide the photos and written record they need to assess the make-safe.

Insurance builders, strata managers, insurers, adjusters and property owners. Call 08 6558 1861 with the address, a site contact and a description of the damage.

Why Elevate?

Same Day Reports

Insurance reports delivered the same day as inspection.

Assessor-Written Causation

Three years assessing claims at Suncorp and three years inside an insurance builder. Findings written to survive scrutiny, including AFCA review.

Licensed Stormseal Installers

Heat-shrink roof protection that stays put for twelve months, not tarps that fail five times a claim.

Independent by Structure

We assess and report. We do not quote the remedial works we recommend.

Need the Works Done, not just Assessed?

Elevate Roof & Building Solutions assesses, reports and secures. Maintenance programs, remedial works and insurance repairs are delivered by our repair and maintenance division, Elevate Property Services Group, through a vetted and licensed trade network across WA.